.
PEY - 702
When on the main screen (the screen showing the Set values and count values), first read bar code a for box A. If you read the A15 bar code, you set the a-door open time to 15 seconds. If you only read bar code a, the time remains at its old value) you will see that box a has set and P-- written on the screen. Read the Part_No (beginning with P) barcode that identifies the product type on box A. You'll see the P-- has been deleted. Read the Quantity (beginning with Q) bar code, which shows how many products can be placed on box A. See THE SET is deleted and the value in the Quantity bar code is written. Part_No or Quantity bar codes do not have priority for reading. These bar codes can be read in the order requested within ten seconds of the a bar code (or B bar code) being read. If the Part_No and Quantity bar codes are not read within ten seconds, the process is canceled. The new product is defined for box A. You can perform the above operations in box B by reading the corresponding bar codes in box B after reading the bar code B.
SPECIFICATIONS OF PEY-702
| Supply voltage: | Barcode reader input (Front panel). |
|---|---|
| Input Communication: | RS232 serial communication outputs (Rear panel). |
| Output Communication: | 24 VDC supply input 4 . |
| Output Type: | Led indicator showing relay output (NC/NO) and outputs. |
| Feature1: | Two three-digit indicators for box a showing Set value and Count. |
| Feature2: | Open and FULL leders showing the relay positions of box a. |
| Feature3: | Two three-digit indicators for box B showing Set value and Count. |
| Feature4: | Open and FULL leders showing the relay positions of box B. |
| Feature5: | Box - Product identification. |
| Feature6: | flash feature. |
| Feature7: | low power consumption. |
| Feature8: | low maintenance cost. |
| Feature9: | Windscreen with filter to prevent reflection. |